Multi-Gym

820

The 820 Multi-Gym is an 8-stack, 10-station machine that delivers maximum versatility for facility users. The cable crossover station has fixed high pulleys, standing and seated tricep push-down stations, pull-down and long-pull stations, and two pulley stations with fixed high and low pulleys for a wide variety of exercises.

Easy-to-read instructional placards guide users through workout options.

Facebook Twitter Email

Flash Required for 360 View

Get Adobe Flash player

Specifications

 

Overview

The 820 Multi-Gym is an 8-stack, 10-station machine that delivers maximum versatility for facility users. The cable crossover station has fixed high pulleys, standing and seated tricep push-down stations, pull-down and long-pull stations, and two pulley stations with fixed high and low pulleys for a wide variety of exercises.

Easy-to-read instructional placards guide users through workout options.

Equipment Features

Pivot Points and Joints Pillow block or flange-mount, motor-grade rotary bearings or sleeve bearings utilising either oil-impregnated bronze bushings or prelubricated Igus nylon bushings.
Weight Stack On most selectorised units, the weight stack is elevated by 5 inches to facilitate user pin selection from seated position.
Frame and Finish 11 gauge (.120"") and 7 gauge (.188"") 2x4-inch bent electroweld steel tubing. Minimum of 3 standard bolt tabs on appropriate units. Abrasive grit pre-finish is followed by electrostatically applied, heat-cured powder coat.
Upholstery Premium-quality upholstery with Beautyguard protective topcoat finish. Fabric meets or exceeds Californian fire regulations (Bulletin 117, section E). Double-layer slipcover in appropriate high-wear areas. Double stitching on all seams.
Pulleys and Cables Glassfibre-reinforced nylon pulleys with precision, motor-grade ball bearings. 3/16-inch (7x19) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch, coated to 3/16 inch. The cable will conform to specification MIL-W-83420D-BARE cable only. Attachments are climbing-rated carabiner design
Bearings and Pivot Points Oversized linear reticulating ball bearings are self-aligning, sealed and running on case-hardened shafts.
Guide Rods Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and retardation of rust.
Selector Plates Each selector plate is entirely precision machined on all surfaces. Top plate has replaceable Igus precision self-lubricating bushings Black-painted protective finish.
Bolts Grade-5 black zinc in most applications.
Seat Adjustment Hardened plunger and snap-pin assembly with easy-grip pull-pin and ""slide"" insert for easy movement of adjustment.
Padding 2-inch, 8-lb high-density foam.
Cable Routing Wherever possible, redirection pulleys are used to route cables close to frame to minimise chance of external interference.
Handles Slip-resistant rubber sleeve with machined alloy end-cap.

Equipment Specifications

Standard Frame Colours Gloss Metallic Silver
Metallic Ash
Desert Bronze
Black Magic Gloss
Gloss White
Standard Upholstery Colours Black
Mahogany
Imperial Blue
Paprika
Graphite
Royal Blue
Slate
American Beauty Red
Terracotta
Options Rubber Feet

Equipment Dimensions & Weight

Length (cm/inches) 465 cm/183 inches
Width (cm/inches) 402 cm/158 inches
Height (cm/inches) 234 cm/92 inches
Equipment Weight (kg/lbs) 1,475 kg/3,251 lbs

Warranty

Frame 10 years
Parts (mechanical) 5 years
Wear Items (months) 6 months
Other (including hand grips, end caps, cables, selector pins, shrouds) 1 year
Labour 1 year

Manufacturer reserves the right to change or alter specifications at any time. Precor protects its product by vigorously enforcing its patent, trademark, copyright and other applicable intellectual property rights in the USA and in other countries. Precor is a registered trademark of Precor Incorporated.

Multi-Gym 820

Brochure

Purchase Tools

Space Planner

Compare

Share

Compare Products

You have no items to compare.