Chest Press


The S-Line Chest Press features comfortable, oversized grips with multiple positions, an adjustable back pad for desired pre-stretch start position and an adjustable seat for proper exercise height and form.

Facebook Twitter Email

Flash Required for 360 View

Get Adobe Flash player




The S-Line Chest Press features comfortable, oversized grips with multiple positions, an adjustable back pad for desired pre-stretch start position and an adjustable seat for proper exercise height and form.

Equipment Features

General Features Oversized press grips with multiple positions. Adjustable back pad for desired pre-stretch start position. Weight Stack 110 kg (240 lbs).
Instructional placard Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximise workouts.
Adjustments Seat and back pad adjustments feature custom-moulded sleeve-tube inserts inside attractive, oval-shaped steel tubing. Ensures stable, low-friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is colour coded for easy identification. Viewing hold and etched numbers on sleeve tube for accurate positioning of seat and back pad. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is colour coded for easy identification. Slip-resistant, rubber grip handle assembly with machine alloy end-cap. Push grips are oversized to 39 mm (1.5 inches) in diameter. Pull grips and handlebars are 32 mm (1.25 inches) in diameter.
Weight Stack Weight plates are 25-mm (1-inch)-thick, machined, cast weight plates in 5-kg (10-lb) and 7-kg (15-lb) sizes, with fitted nylon bushings to ensure smooth travel on guide rods. Top weight plate is machined, cast weight plate designed for a 5-kg (10-lb) starting weight (11 kg/25 lbs on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight-selection pin assures positive locking to plates and is secured to weight stack with a thick, plastic-coated tethering cable. Weight selection pin is colour coded for easy identification. Guide rods are 19-mm (3/4-inch)-diameter steel, polished, with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5-mm cable (Leg Press: 6.3 mm) coated. Customised end fittings tested to 250,000 cycles under a 200-kg (4,440-lb) load. Six machines require no removal of pulleys to route cable. For the other 7 machines, all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length, translucent shrouds enclose the back of the weight stack. Front shroud is full length with a 75-mm (3-inch)-wide slot for access to the weight-selection pin. Slotted front shroud meets ASTM and EN0957 safety standards.
Frame and Finish 2.75-mm (11-gauge), 50x100-mm (2x4-inch) tubing is bent electro-welded steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver).
Upholstery Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds Californian fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4-inch-thick plywood back, 3/4-inch high-density foam base, 3/4-inch high-density foam core and industrial fabric cover. Total thickness is 65 mm (2.5 inches).
Pulleys and Cables Glass-fibre-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation.
Bearings and Pivot Points ABEC-rated bearings for added durability and smooth feel. Size 11 mm (4 1/2 inches). Axles are 25-mm (1-inch) solid-steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow-block, ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension).
Water Bottle and Accessories Holder Top cap secures the front and back shrouds and includes an accessory shelf and 102-mm (4-inch)-diameter water bottle holder.
Rubber Feet Yes

Equipment Specifications

Weight Stack (kg/lbs) 240 lbs/110 kg
Add-on Weight Stack (lbs / kg) 5 lbs/2.5 kg
Workout Area (L x W) (cm/inches) 65 x 51 inches/166 x 130 cm
Standard Frame Colours Experience Titanium
Standard Upholstery Colours Black
Optional Upholstery Colours Mahogany
Imperial Blue
Royal Blue
American Beauty Red
Terra Cotta

Equipment Dimensions & Weight

Length (cm/inches) 39 inches/99 cm
Width (cm/inches) 51 inches/130 cm
Height (cm/inches) 69 inches/175 cm
Equipment Weight (kg/lbs) 450 lbs/205 kg

Delivery Dimensions & Weight

Length (cm/inches) 87 inches/221 cm
Width (cm/inches) 52 inches/132 cm
Height (cm/inches) 37 inches/94 cm
Delivery Weight (kg/lbs) 608 lbs/276 kg


EN957 / ASTM EN957

Manufacturer reserves the right to change or alter specifications at any time. Precor protects its product by vigorously enforcing its patent, trademark, copyright and other applicable intellectual property rights in the USA and in other countries. Precor is a registered trademark of Precor Incorporated.

Chest Press C001ES