Adjustable Cable Cross-over

407B

The 407B Adjustable Cable Crossover is a stand-alone cable crossover machine with two adjustable high/low pulley stations and a connector that offers dual chin-up bar options. The Crossover adjusts quickly to give users a wide range of exercise options.

Facebook Twitter Email

Flash Required for 360 View

Get Adobe Flash player

Adjustable Cable Cross-over

Specifications

 

Overview

The 407B Adjustable Cable Crossover is a stand-alone cable crossover machine with two adjustable high/low pulley stations and a connector that offers dual chin-up bar options. The Crossover adjusts quickly to give users a wide range of exercise options.

Equipment Features

Pivot Points and Joints Pillow block or flange-mount, motor-grade rotary bearings or sleeve bearings utilising either oil-impregnated bronze bushings or prelubricated Igus nylon bushings.
Weight Stack On most selectorised units, the weight stack is elevated by 5 inches to facilitate user pin selection from seated position.
Frame and Finish 11 gauge (.120") and 7 gauge (.188") 2x4-inch bent electroweld steel tubing. Minimum of 3 standard bolt tabs on appropriate units. Abrasive grit pre-finish is followed by electrostatically applied, heat-cured powder coat.
Upholstery Premium-quality upholstery with Beautyguard protective topcoat finish. Fabric meets or exceeds Californian fire regulations (Bulletin 117, section E). Double-layer slipcover in appropriate high-wear areas. Double stitching on all seams.
Pulleys and Cables Glassfibre-reinforced nylon pulleys with precision, motor-grade ball bearings. 3/16-inch (7x19) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch, coated to 3/16 inch. The cable will conform to specification MIL-W-83420D-BARE cable only. Attachments are climbing-rated carabiner design
Bearings and Pivot Points Oversized linear reticulating ball bearings are self-aligning, sealed and running on case-hardened shafts.
Guide Rods Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and retardation of rust.
Selector Plates Each selector plate is entirely precision machined on all surfaces. Top plate has replaceable Igus precision self-lubricating bushings Black-painted protective finish.
Bolts Grade-5 black zinc in most applications.
Cable Routing Wherever possible, redirection pulleys are used to route cables close to frame to minimise chance of external interference.
Handles Slip-resistant rubber sleeve with machined alloy end-cap.

Equipment Specifications

Weight Stack Standard (kg/lbs) 68 kg/150 lbs
Weight Stack Heavy (kg/lbs) 91 kg/200 lbs
Standard Frame Colours Gloss Metallic Silver
Metallic Ash
Desert Bronze
Black Magic Gloss
Gloss White
Standard Upholstery Colours Black
Mahogany
Imperial Blue
Paprika
Graphite
Royal Blue
Slate
American Beauty Red
Terracotta
Options Rubber Feet Standard Shroud

Equipment Dimensions & Weight

Length (cm/inches) 447 cm/176 inches
Width (cm/inches) 109 cm/43 inches
Height (cm/inches) 231 cm/91 inches
Equipment Weight (kg/lbs) 396 kg/870 lbs

Warranty

Frame 10 years
Parts (mechanical) 2 years
Upholstery 6 months
Other (including hand grips, end caps, cables, selector pins, shrouds) 2 years
Labour 1 year

Manufacturer reserves the right to change or alter specifications at any time. Precor protects its product by vigorously enforcing its patent, trademark, copyright and other applicable intellectual property rights in the USA and in other countries. Precor is a registered trademark of Precor Incorporated.

Adjustable Cable Cross-over

Line Brochure

Brochure

Purchase Tools

Space Planner

Compare

Share

Compare Products

You have no items to compare.