Discovery Series Selectorised Leg Press

Features

Ergonomic Design

The angled foot plate and seat track provide the optimal user position that minimises shear force on their knees.

Fixed Foot Plate

The oversized fixed foot plate provides a stable foundation for users of all sizes.

User-friendly Weight Stack

The weight stack utilises a simple pin adjustment that users can easily reach from the seated position.

Details

Specifications

Equipment Features

Instructional placard	Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify.
Upholstery	Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams.
Rubber Feet	Yes
Adjustments	Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use.
Water Bottle and Accessories Holder	The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean.
Bearings and Pivot Points	Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
Pulleys and Cables	Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference.
Frame and Finish	The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat.
General Features	Conveniently located release handle for seat adjustment to fit a wide range of users. Low-maintenance rollers and rigid tubular chrome steel tracks create smooth exercise motion. Weight Stack 181 kg (400 lbs).

Equipment Specifications

Incremental Add-on Weight	10 lbs / 4.5 kg
Standard Shroud Colour	Pacific Blue Black
Weight Stack (kg/lbs)	400 lbs / 182 kg
Standard Upholstery Colours	All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate
Standard Frame Colours	Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl
Workout Area (L x W)	221 L x 122 W / 87 L x 48 W

Weight Stack(s)

Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.

Equipment Dimensions & Weight

Length	77 inches / 196 cm
Width	48 inches / 122 cm
Equipment Weight	875 lbs / 397 kg
Height	59 inches / 150

Delivery Dimensions & Weight

Delivery Weight

960 / 435

Regulatory

EN957	EN957
ASTM	Yes

Warranty & Service

Warranty Statement (Commercial Cardio)

Warranty Statement (Commercial Strength)

Brochures and Manuals

Select a brochure or manual for more product information.

Please Select

Digital Catalogue
Product Brochure
Line Brochure
Getting Started Guide
Assembly Guide
Shroud Assembly Guide
Maintenance guide
Strength Safety Regulatory Warranty

Get a Quote

Contact Precor Sales and get a personalised quote today.

Get Quote

Leg Press DSL0602

DSL0602