Vitality Line Pulldown Seated Row

Features

Adjustable Thigh Pad

The thigh hold-down pad features an easy-to-adjust mechanism to accommodate all users.

Two Exercises. One Machine

This unit accommodates both the lat pull-down and mid-row exercise movements.

Protective Bar Storage

The row bar rests on a storage plate with a protective coating so that the bar is out of the way when the pull-down is being used. The protective coating protects the storage plate from scratches and dents.

Details

Specifications

Equipment Features

Weight Stack	Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods. Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lbs / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards.
Upholstery	Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).
Rubber Feet	Yes
Accessory Holder(s)	Yes
Adjustments	Extra long seat at a fixed seat height. Thigh roller pads can adjustment easily from a seated position to accommodate short to tall users. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is yellow color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter.
Instructional placard	Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts.
Bearings and Pivot Points	ABEC-rated bearings for added durability and smooth feel. Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow block ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension).
Water Bottle and Accessories Holder	Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder.
Pulleys and Cables	Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation.
Frame and Finish	11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver).
General Features	2 machines in one: lat pulldown and seated row. Easy-to-adjust thigh hold-down pads. Extended seat and foot bar. Weight Stack 220 lbs (110 kg) with 7.5 lb add-on system.

Equipment Specifications

Incremental Add-on Weight	3.5 kg
Standard Shroud Colour	Translucent
Optional Upholstery Colours	All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate
Weight Stack (kg/lbs)	100 kg
Standard Upholstery Colours	Black
Standard Frame Colours	Experience Titanium
Workout Area (L x W)	193 x 150 cm

Equipment Dimensions & Weight

Length	201 cm
Width	132 cm
Equipment Weight	226 kg
Height	221 cm

Delivery Dimensions & Weight

Length	208 cm
Width	89 cm
Height	78 cm
Delivery Weight	240 kg

Regulatory

EN957	EN957
ASTM	Yes

Warranty & Service

Warranty Statement (Commercial Cardio)

Warranty Statement (Commercial Strength)

Brochures and Manuals

Select a brochure or manual for more product information.

Please Select

Digital Catalogue
Line Brochure
Owner's Manual

Get a Quote

Contact Precor Sales and get a personalised quote today.

Get Quote

Pulldown/Seated Row C026ES

C026ES