Rear Delt / Pec Fly DSL0505

Features

Multi-purpose

This unit allows you to provide two traditional movements in one unit. Easy adjustment pins allow users to seamlessly move between pec fly and rear delt movements.

Pivoting Arms

The dual pivoting arms allow for users of different arm lengths to comfortably perform each exercise while maintaining proper form.

Independent Movement Arms

Independent movement arms provide a variety of movements on one unit, while increasing core activity.

Details

Specifications

Equipment Features

Instructional placard	Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify.
Upholstery	Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams.
Rubber Feet	Yes
Adjustments	Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use.
Water Bottle and Accessories Holder	The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean.
Bearings and Pivot Points	Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
Pulleys and Cables	Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference.
Frame and Finish	The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat.
General Features	Dual independent-movement arms feature upper pivots to accommodate arm lengths and can be set to 13 starting positions over a 120-degree range. Weight stack offset to user's right for the most convenient access. Weight Stack 109 kg (240 lbs).

Equipment Specifications

Incremental Add-on Weight	5 lbs / 2.3 kg
Standard Shroud Colour	Pacific Blue Black
Weight Stack (kg/lbs)	240 lbs / 109 kg
Standard Upholstery Colours	All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate
Standard Frame Colours	Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl
Workout Area (L x W)	208 L x 208 W / 82 L x 82 W

Weight Stack(s)

Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.

Equipment Dimensions & Weight

Length	54 inches / 137 cm
Width	56 inches / 142 cm
Equipment Weight	594 lbs / 269 kg
Height	84 inches / 213 cm

Delivery Dimensions & Weight

Delivery Weight

655 / 297

Regulatory

EN957	EN957
ASTM	Yes

Warranty & Service

Warranty Statement (Commercial Cardio)

Warranty Statement (Commercial Strength)

Brochures and Manuals

Select a brochure or manual for more product information.

Please Select

Digital Catalogue
Product Brochure
Line Brochure
Getting Started Guide
Assembly Guide
Shroud Assembly Guide
Maintenance Guide
Strength Safety Regulatory Warranty

Get a Quote

Contact Precor Sales and get a personalised quote today.

Get Quote


	The Discovery™ Series combines all the functional performance elements demanded from a strength line, but with a focus on ease of use and thoughtful design detail to appeal to a wide range of exercisers.